Bộ sạc pin 1AC 24VDC 10A Phoenix Contact QUINT4-CHARGER/1AC/24DC/10 - 2907990

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PHOENIX CONTACT

• 

  Tất cả các Model Bộ lưu điện UPS DC của Phoenix Contact

• 

  Tất cả các model Lưu điện DC UPS Siemens | SITOP DC UPS uninterruptible power supplies

• Xem thêm

Bộ sạc pin 1AC 24VDC 10A Phoenix Contact QUINT4-CHARGER/1AC/24DC/10 - 2907990

Battery charger QUINT CHARGER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A

 

Technical data

Product properties

Product type	Charger
Product family	QUINT CHARGER
MTBF (IEC 61709, SN 29500)	> 500000 h (230 V AC, at 40 °C)
Insulation characteristics
Protection class	I
Degree of pollution	2

 

Electrical properties

Number of phases

1.00

 

Input data

AC operation
Input voltage range	100 V AC ... 240 V AC -15 % ... +10 %
Derating	< 90 V AC (2.5 %/V)
Frequency range (fN)	50 Hz ... 60 Hz ±10 %
Current consumption	2.7 A (100 V AC)
	1.2 A (240 V AC)
Input fuse	6.3 A (internal (device protection), slow-blow)
Recommended breaker for input protection	10 A ... 16 A (AC: Characteristic B, C, D, K, or comparable)
DC operation
Input voltage range	110 V DC ... 250 V DC
Current consumption	2.4 A (110 V DC)
	1.1 A (250 V DC)
Digital Control (configurable)
Designation	Remote / Service

 

Output data

Efficiency	89 %
	91 %
Nominal output voltage	24 V DC
Setting range of the output voltage (USet)	19.2 V DC ... 28.6 V DC
Nominal output current (IN)	10 A
Residual ripple	< 20 mVPP
Short-circuit-proof	yes
No-load proof	yes
Output power	240 W
Maximum no-load power dissipation	< 4 W (for 230 V AC)
Power loss nominal load max.	< 35 W (for 230 V AC)
Connection in parallel	no
Connection in series	No
Signal: UIn OK
Output voltage	24 V DC
Continuous load current	20 mA
Signal ground SGnd	Reference ground signal contacts
Signal: Bat.-Voltage OK
Output voltage	24 V DC
Continuous load current	20 mA
Signal ground SGnd	Reference ground signal contacts
Signal: Alarm
Output voltage	24 V DC
Continuous load current	20 mA
Signal ground SGnd	Reference ground signal contacts

 

Energy storage

Nominal voltage UN	24 V DC
Charging voltage	max. 32 V DC
Charging current	typ. 10 A
Nominal capacity range	7 Ah ... 300 Ah
Battery technology	VRLA, VRLA-WTR, LI-ION (LiFePO4)
Charge characteristic curve	IU

 

Connection data

Input
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	2.5 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	6.5 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Output
Connection method	Screw connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	2.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	2.5 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	2.5 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	2.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	14
Stripping length	6.5 mm
Tightening torque, min	0.5 Nm
Tightening torque max	0.6 Nm
Signal
Connection method	Push-in connection
Conductor cross section, rigid min.	0.2 mm²
Conductor cross section, rigid max.	1.5 mm²
Conductor cross section flexible min.	0.2 mm²
Conductor cross section flexible max.	1.5 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.	1.5 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.	0.2 mm²
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.	1.5 mm²
Conductor cross section AWG min.	24
Conductor cross section AWG max.	16
Stripping length	8 mm

 

Interfaces

Interface

MINI-USB type B

 

Signaling

Signal output: Transistor output, active
Signalization designation	UIn OK
Status display	Green LED
Signal output: Transistor output, active
Signalization designation	Bat.-Voltage OK
Status display	Green LED
Signal output: Transistor output, active
Signalization designation	Alarm
Status display	LED red
Signal output
Signalization designation	Reference potential for the signal inputs and outputs

 

Dimensions

Width	60 mm
Height	130 mm
Depth	126 mm
Installation dimensions
Installation distance right/left	0 mm / 0 mm
Installation distance top/bottom	50 mm / 50 mm
Alternative assembly
Width	123 mm
Height	130 mm
Depth	63 mm

 

Material specifications

Housing material	Metal
Hood version	High-grade steel plate
Side element version	Aluminum

 

Environmental and real-life conditions

Ambient conditions
Degree of protection	IP20
Ambient temperature (operation)	-40 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 4000 m (> 2000 m, observe derating)
Climatic class	3K3 (EN 60721)
Max. permissible relative humidity (operation)	≤ 95 % (At +25°C, non-condensing)
Shock	30g, 18 ms in accordance with IEC 60068-2-27
Vibration (operation)	2 Hz ... 15 Hz, ±2.5 mm amplitude; 15 Hz ... 150 Hz, 2.3g

 

Approvals

UL approvals	UL Listed UL 61010-1
	UL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C
UL
Identification	UL Listed UL 61010

 

EMC data

Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial)
Noise immunity	Immunity in accordance with EN 61000-6-2 (industrial)
Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Conducted noise emission	EN 61000-6-3 (Class B)
Noise emission	EN 61000-6-3 (Class B)
Harmonic currents
Frequency range	0 kHz ... 2 kHz
Electrostatic discharge
Standards/regulations	EN 61000-4-2
Electrostatic discharge
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion A
Electromagnetic HF field
Standards/regulations	EN 61000-4-3
Electromagnetic HF field
Frequency range	80 MHz ... 1 GHz
Test field strength	10 V/m (Test Level 3)
Comments	Criterion A
Fast transients (burst)
Standards/regulations	EN 61000-4-4
Fast transients (burst)
Input	2 kV (Test Level 3 - asymmetrical)
Output	1 kV (Test Level 2 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B
Surge voltage load (surge)
Standards/regulations	EN 61000-4-5
Input	2 kV (Test Level 4 - symmetrical)
	4 kV (Test Level 4 - asymmetrical)
Output	1 kV (Test Level 1 - symmetrical)
	2 kV (Test Level 3 - asymmetrical)
Signal	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B
Conducted interference
Standards/regulations	EN 61000-4-6
Conducted interference
I/O/S	asymmetrical
Frequency range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)
Criteria
Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

 

Standards and regulations

Standard – Safety extra-low voltage	IEC 61010 (SELV) / (PELV)
Standard - Safe isolation	DIN VDE 0100-410
Standard - safety for equipment for measurement, control, and laboratory use	IEC 61010-1
Overvoltage category
EN 61010-1	II

 

Mounting

Mounting type

DIN rail mounting

 

Commercial data

Item number	2907990
Packing unit	1 pc
Minimum order quantity	1 pc
Product key	CMUI13
GTIN	4055626289434
Weight per piece (including packing)	1,238 g
Weight per piece (excluding packing)	942 g
Customs tariff number	85044083
Country of origin	CN

 

Classifications

ECLASS

ECLASS-11.0	21052901
ECLASS-12.0	21052901
ECLASS-13.0	21052901

 

ETIM

ETIM 8.0

EC001184

 

UNSPSC

UNSPSC 21.0

26111700

 

Approvals

UL Listed

Approval ID: FILE E 123528
 

cUL Listed

Approval ID: FILE E 123528
 

cUL Listed

Approval ID: FILE E 199827
 

UL Listed

Approval ID: FILE E 199827
 

cULus Listed

 

cULus Listed

 

Environmental product compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 25;
	For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads”

- Tài liệu kỹ thuật Phoenix Contact QUINT4-CHARGER/1AC/24DC/10 - 2907990 ở đây.

 

Compatible products

Data cable
MINI-SCREW-USB-DATACABLE - 2908217
Mounting adapter
UWA 130 - 2901664
Mounting adapter
UWA 182/52 - 2938235
Energy storage
UPS-BAT/PB/24DC/7AH - 1274118
Energy storag
UPS-BAT/PB/24DC/12AH - e1274119
Energy storage
UPS-BAT/PB/24DC/20AH - 1348516
Energy storage
UPS-BAT/PB/24DC/40AH - 1354641
Energy storage
UPS-BAT/VRLA-WTR/24DC/13AH - 2320416
Energy storage
UPS-BAT/VRLA-WTR/24DC/26AH - 2320429
Energy storage
UPS-BAT/LI-ION/24DC/120WH - 2320351
=> Ngưng sx, nâng cấp thành:
Energy storage
UPS-BAT/LI/24DC/128WH - 1396415
Energy storage
UPS-BAT/LI-ION/24DC/924WH - 2908232
Relay base
RIF-1-BPT/2X21 - 2900931
Single relay
REL-MR- 24DC/21HC - 2961312