Bộ lập trình điều khiển an toàn PNOZmulti-2 Exp USB-20 Pilz PNOZ m B1 | 772101

THÔNG TIN THAM KHẢO

• Danh mục Model sản phẩm PILZ

• 

  Các model Bộ lập trình PLC của AB Allen-Bradley Rockwell Automation

• 

  Tất cả các models Module lập trình kiểm soát điều khiển SIMATIC của Siemens | SIMATIC Drive controller CPUs

• Xem thêm

Bộ lập trình điều khiển an toàn PNOZmulti-2 Exp USB-20 Pilz PNOZ m B1 | 772101

Configurable safe small controllers PNOZmulti 2 base unit, expandable, Ethernet interface with switch, USB 20 memory.
 

General data

Approval	CE   UKCA   cULus Listed   KOSHA   TÜV   EAC (Eurasian)
Application range	Failsafe

 

Electrical data

Purpose of U1	System supply
Supply voltage (V)	24  V
Type of supply voltage U1	DC
Power consumption DC	18.5  W

 

Test clock outputs

Number of test pulse outputs

4

 

Ethernet interface

Ethernet IP address	169.254.60.1
Connector type ETHERNET int.	RJ45
Ethernet transmission rate	10 MBit/s   100 MBit/s

 

CANopen interface

Number of Ethernet interfaces

2

 

Environmental data

Ambient temperature standard	EN 60068-2-14
Ambient temperature	0  °C
Storage temperature standard	EN 60068-2-1/-2
Climatic suitability standard	EN 60068-2-30   EN 60068-2-78
Humidity rating	93 % r. h. at 40 °C
Condensation permitted?	Not permitted
Perm. operating height ASL	2000 m
EMC to standard ...	EN 61131-2
Vibration to standard ...	EN 60068-2-6
Clearance & creepage dist. to	EN 61131-2
Overvoltage category	II
Pollution degree clear.&creep.	2
Protection type standard	EN 60529
Protection type, mounting
Protection type, housing
Terminal protection type

 

Mechanical data

Mounting position	horizontal on top hat rail
DIN-rail dimensions	35 x 7.5 EN 50022
Housing material lower section	PC
Housing material front plate	PC
Housing material upper part	PC
Connection terminal	Screw terminal   Cage clamp terminal
Terminal style	plug-in
Flex. cond. c/s AWG info	24 - 12 AWG
Height dimension	101.4  mm
Width dimension	45  mm
Depth dimension	120.2  mm
Net weight	209  g
Gross weight	219  g

 

Environment

RoHS directive	2011/65/EU   2015/863/EU
RoHS conformity	yes
RoHS exceptions	yes
RoHS except.s acc. to direct.	7A
REACh compliance	contains min. 1 SVHC-substance
REACh included substances	Lead
%-part of the pollutant	> 0,1 %
CAS No.	7439-92-1
WEEE classifikation (08/2018)	5 devices (feed size < 50cm)

 

Commercial data

Harmonized System Code	85371091
EAN-Code	4046548069419
ECLASS version	ECLASS-13
ECLASS Reference Feature	27242207
ETIM Version	ETIM-9.0
ETIM Reference Group	EG000024
ETIM Reference Feature	EC000236
Volume	0.560

 

Optional accessories

Basic Licence for PNOZmulti Service
773011B
Basic service licence PNOZmulti Configurator, for using the service version on a workstation, licence key to enable the service functionality. Note: Does not include software! You can load thesoftware from the Pilz Homepage .

USB Memory 512MB
779213
USB memory, 512 MB, for PNOZ m B1, base unit PNOZmulti 2.

User Licence for PNOZmulti Service
773011K
User service licence PNOZmulti Configurator, for using the service version on an additional workstation, licence key to enable the service functionality. Note: Does not include software! You can load the software from the Pilz Homepage.

RJ45 Connector
380401
RJ45 plug-in connector, straight, IP20, 8-pin, Cat6a, IDC connection,AWG 22, cable diameter: 5.5-8.5mm

User Licence for PNOZmulti Config
773010K
User licence PNOZmulti Configurator, full version for use on an additional workstation, licence key for enabling the full functionality, only valid for expanding a base licence. Attention: Does not include software! You can load the software from thePilz Homepage .

Basic Upgr Licence for PNOZmulti Service
773011U
Upgrade service licence PNOZmulti Configurator, to upgrade the version number of an existing basic service licence, licence key to enable the service functionality. Note: Does not contain software! You can load the software from the Pilz Homepage.

User Upgr Licence for PNOZmulti Service
773011V
Upgrade service licence PNOZmulti Configurator, to upgrade the version number of an existing user service licence, licence key to enable the service functionality. Note: Does not include software! You can load the software from the Pilz Homepage.

Basic Upgr Licence for PNOZmulti Config
773010U
Upgrade licence for upgrading the version number of an existing basic licence of the full version of the software PNOZmultiConfigurator, licence key for enabling the full functionality.

Obligatory accessories
Basic Licence for PNOZmulti Config.
773010B
Basic licence for the software PNOZmulti Configurator for using the full version on a workstation, licence key for enabling the full functionality.

Set4 Screw Terminals
750016
Set of plug-in screw terminals for PNOZ m B1, base unit, smallcontrollers PNOZmulti 2.

Set4 Spring Terminals
751016
Set of spring-loaded terminals for PNOZ m B1, base unit, smallcontrollers PNOZmulti 2.